Oce VarioPrint 6000 MICR series, User Manual Operating Information

Page: 249 / 264

#
Solution Toner pollution problem
• Change the 'Paper quality' setting from 'Nor-
mal' to 'Low' (see ‘Change the Paper quality ’
on page 133 ).
• Use the 'Paper quality test' to determine if this
new setting is the right cleaning mode for this
media.
• The sheets of the 5 th
set must be totally toner
free, also at the edges of the media size width.
• When these sheets still show toner pollution,
you can set the 'Paper quality' setting to 'Lower'
(see
‘Change the Paper quality ’ on page 133 ).
• Use the 'Paper quality test' to verify that this
new setting is the right cleaning mode for this
media.
Toner pollution on the first
sheets after the automatic black
image cleaning procedure.
• Change the 'Paper quality' setting from 'Nor-
mal' to 'Low' (see ‘Change the Paper quality ’
on page 133 ).
• Use the 'Paper quality test' to determine if this
new setting is the right cleaning mode for this
media.
• The sheets of the 5 th
set must be totally toner
free, also at the edges of the media size width.
• When these sheets still show toner pollution,
you can set the 'Paper quality' setting to 'Lower'
(see
‘Change the Paper quality ’ on page 133 ).
• Use the 'Paper quality test' to verify that this
new setting is the right cleaning mode for this
media.
Note:
When the peripheral pollution mainly
occurs at 1 side of the sheet, it is advised
to rotate the media in the paper tray by
180 degrees.
Toner pollution on the first
sheets along the edge of the sheet
(2-3 mm) after the automatic
black image cleaning procedure.
Chapter 7 - Keeping the printer running 249
Troubleshooting