Oce VarioPrint 6000 MICR series, User Manual Operating Information

Page: 184 / 264

Description of the main parts
Description of the main parts
#
Description Part
The bypass is a short straight-through paper path for
documents that must not be punched. Bypass 1
Documents that must be punched follow the U-shaped
punch path. The puncher can handle media up to 216
g/m² (80 lb. cover). Punch path 2
The puncher can use many different die sets (see ‘Die
set summary’ on page 185 ). The various die sets make
different types of holes in your documents for different
types of binding. You do not need tools or levers to
replace a die set (see
‘Replace a die set’ on page 189 ).
Die set 3
The chip tray collects the paper chips that arise from
the punching process. You can easily access and empty
the chip tray (see
‘Empty the chip tray’ on page 187 ).
Chip tray 4
The storage area K6 inside the puncher can keep 3 die
sets. Storage area for die
sets 5
The power switch turns the puncher on and off. The
puncher can only operate when the power switch is
in the 'I' position. Power switch 6
Chapter 6 - Optional finishers and other devices 184
Main parts