Oce VarioPrint 6000 MICR series, User Manual Operating Information

Page: 124 / 264

Effect Values Setting
The machine goes on hold after the first set of a
job is printed. You can check the quality and lay-
out of the first set before the machine prints the
remaining sets. 'On' 'Check first
set'
The machine will print the whole job without
stopping after the first set. 'Off'
The machine will print the jobs as indicated in the
job ticket. 'As in job'
The machine always stops before the next sched-
uled job. You must press the Release key to start
each job. 'On' 'Confirm start
of job'
The machine prints the scheduled jobs one after
the other. The machine does not stop before the
next scheduled job, unless there is a reason to stop.
For example when a media is not available. 'Off'
The machine stops before a job when one or more
settings are overruled by the controller. 'On conflict'
Each job is sent to the next available output tray.
In this context, the second stack of the stacker is
also defined as an output tray. 'After each job' 'Next output
tray'
All the jobs are stacked until an output tray is full.
When an output tray is full, the next jobs are sent
to the next output tray. 'When tray is
full'
Chapter 5 - Working with the operator panel 124
Work with the workflow profiles