Oce sx1481, User Manual

Page: 68 / 192

4-4 s
endInG faxes
Sending a fax
Memory transmission
Sending a fax
1
Switch to the fax mode by pressing <
copy
4
fax
4
scan
>.
Fax Ready
Apr 15 2008 1:30pm
2
Place your document on the ADF (see page 2-11 for details).
3
Adjust the scanning resolution and contrast (see page 4-2).
4
Dial the fax number.
• Use the numeric keys to dial the number.
–or–
• Press a one-touch key (see page 3-6).
–or–
• Press <Speed Dial /Group> and the three-digit code (see page 3-8).
–or–
• Use call group dialing (see page 3-10).
–or–
• Use the phone directory dialing (see page 3-11).
5
Press <Start>.
(If you pressed a one-touch key, no need to press <Start>.)
By pressing <Start>, you have given your machine a command.
This command number appears on the first line of the LCD for a few seconds. You will
need to know this command number if you want to cancel the transmission or print a
stored document (see “
Reviewing or canceling commands
” on page 4-7).
== Command:01 ==
Auto Mem100%
6
At the end of the operation, your machine beeps and displays:
** Complete **
Whenever you transmit a document, what actually appears on the top line of the LCD depends
on the information stored in the remote fax machine. The line may even be blank.
NOTE: If you want to cancel a transmission during document scanning, press <Stop>.
If you want to cancel a transmission that is in progress, use the Review Commands
feature.
See “Reviewing or canceling commands” on page 4-7.
NOTE: If the call fails, see “Redialing” on page 4-6.