2-4
G
ettInG
started
Selecting a function
To start setting a function, you must first press <Menu>.
The two ways of selecting a function are described below.
The procedures described in this manual are using short-cut operations.
Short-cut operation with the numeric keys
Press <Enter>, then press a three- or four-digit numbers to select the function.
For example, “Press <Menu>, <2>, <1>, <0>, <1>, <Enter>”…
… you would press <Menu>
… then <2>
… then <1>
… then <0> (the numeric key zero)
… then <1>
… then <Enter>
Searching for a function using the cursor key
Even if you don’t remember the exact commands needed for an operation, you can search
for and enter the function using the cursor key (
q
,
p
,
u
,
t
).
To search for a function:
1
Press <Menu>.
2
Search for the function using <
q
>, <
p
>, <
t
> or <
u
>.
The function table on the next page may be useful for your search.
For example, if you want to set the “Cassette Size,” press <
q
>, <
u
>, <
u
>.
3
Press <Enter> when you have found the function that you want to set.
Going back to the previous screen by pressing <Back>
Press <Back> to go back to the previous menu level.
Summary of Contents for sx1481
