Oce im9220, User Manual

Page: 151 / 434

4 Utility <Administrator Setting>
4-40 Océ im9220
Uti
lit
y <Adm
ini
st
rat
or Settin
g>
Ch
ap
te
r 4
4.3.13 6 Expert Adjustment>Finisher Adjust
Use this function to set the following items for finisher adjustment.
!
Detail
Selectable items may differ depending upon the configuration of the ma-
chine options being installed.
- Fold & Staple Stopper Adjustment
Adjust the dislocation of the center position of staples for the Finisher
9261.
Available range: -128 (wide) to +127 (narrow), 1 step = 0.1mm
- Half fold Stopper Adjustment
Adjust the dislocation of the half fold position for the Finisher 9261.
Available range: -128 (wide) to +127 (narrow), 1 step = 0.1mm
- Trimming Stopper Adjustment
Adjust the trim width for the Trimmer Unit 9264.
Available range: -128 (wide) to +127 (narrow), 1 step = 0.1mm
- Hole-Punch Adjustment
Adjust the dislocation of the punch position for the Punch Kit im9220010
and the Z-Fold Unit 9263.
Punch Kit Vertical Position Adjustment: Available range: -50 (wide) to +50
(narrow), 1 step = 0.1mm
Punch Kit Horizontal Position Adjustment: Available range: -50 (wide) to
+50 (narrow), 1 step = 0.1mm
Punch Unit Vertical Position Adjustment: Available range: -50 (wide) to
+50 (narrow), 1 step = 0.1mm
Punch Unit Horizontal Position Adjustment: Available range: -50 (wide) to
+50 (narrow), 1 step = 0.1mm
- Z-Fold Position Adjustment
Adjust the dislocation of the z-fold position for the Z-Fold Unit 9263.
1st Fold Adjustment: Available range: -128 (wide) to +127 (narrow), 1 step
= 0.1mm
2nd Fold Adjustment: Available range: -128 (wide) to +127 (narrow), 1
step = 0.1mm
- Letter Fold Adjustment
Adjust the dislocation of the three-fold position for the Finisher 9261.
Available range: -128 (wide) to +127 (narrow), 1 step = 0.1mm