Oce im9220, User Manual

Page: 119 / 434

4 Utility <Administrator Setting>
4-8 Océ im9220
Uti
lit
y <Adm
ini
st
rat
or Settin
g>
Ch
ap
te
r 4
8 Paper Setting
1 Tray Setting
Change the setting of the paper size/type/colored
paper/hole-punch/both size adjust. - - -
2 PI Setting
Change the detected size of Upper/Lower tray.
Upper tray: A5/5.5×8.5; A4R/8.5×11R
Lower tray: A5/5.5×8.5; A4R/8.5×11R; 8.5×14/8×13,
8.12×13.2, 8.25×13, 8.5×13
Upper tray: 5.5×8.5, 8.5×11R
Lower tray: 5.5×8.5, 8.5×11R,
8.5×14
9 LCD Backlight Setting
Adjust the backlight of the touch panel. Standard
10 Annotation Setting
Register, edit or delete the Annotation setting. - - -
2 Administrator/Machine Setting
1 Administrator Registration
Register the name of the administrator and the extension
number. The registered contents are displayed on the
Counter Screen.
Name Input: 8 digits/Extension
Number Input: 5 digits - - -
3 User Authentication/Account Track
1 General Settings
1 User Authentication
Set the authentication method and the number of
sections to be managed.
User Authentication, Account Authentication, User/
Account Auth.Connect, Account Name, Password
Input Timing, Account Distribute Number User Authentication (Off), Ac-
count Authentication (Off),
User/Account Auth.Connect
(Off), Account Name (Off),
Password Input Timing (At
JOB Complete), Account Dis-
tribute Number (1000)
2 Account Track
Set the section management against each mode and
the machine condition when reaching the copy limit.
Copy/Printer, Scanner, Select Effect of Reaching
Copy Limit (Immediately/After Print/Warning Only) Copier/Print/Scanner: Not
Use
Effect of Reaching Copy Limit
(Immediately)
2 Account Track Setting
Set the account track setting. Change, Add or Delete is
available.
Account No./Account name/Password/Limit - - -
3 User Authentication Setting
Register, Change, Add or Delete the user authentication
when the User Authentication is set in “01>01 Authenti-
cation Setting.”
User No./User Name/Password/Account Name/Useable
Function (Copy, Scanner, Store/Recall, Printer) - - -
4 Non register/Output Set
Set to count the output of non-registered users and sec-
tions
On/Off
On
Specific setting and Description Default