Oce im9220, User Manual

Page: 14 / 434

Paper Setting 1
Océ im9220 1-3
Pap
er Set
ting
Chapter 1
Vertical: -9% to +9% (in 0.1% increments)
Horizontal: -9% to +9% (in 0.05% increments)
Up/Down: -99mm to +99mm (in 0.1mm increments)
Right/Left: -99mm to +99mm (in 0.1mm increments)
1.1.2 Paper Type Specifications
The following four paper types are provided according to the plainness of pa-
per.
Smooth, Fine, Normal, Embossed
Set paper type details as referring to the specifications listed in the table on
the following page. Any paper type other than these four will be require spe-
cial settings.
Fine
The Fine paper is a non-coated paper generally used for offset printing. The
fine paper has a high degree of whiteness and used for various purposes.
Normal
The Normal paper is used for copying in general and is called “PPC paper”.
The normal paper is usually not a recycled paper.
Embossed
The Embossed paper has a non-smooth surface on which a toner is hard to
be fixed. Fine paper types such as book paper and cotton paper are included
in this category.
Blank Insert
Blank Insert is not a category of the paper type. This is only fed without being
printed. When the Cover With Blank Sheet, Blank Insert, or OHP interleave
blank function is used, specify [Blank Insert] to a tray to which a paper al-
ready printed and not copied by this machine is loaded, or a blank paper only
to be fed is loaded.
User
When a paper type other than that of which can be specified on this machine
is used, use this function. For the details, contact your service representa-
tive.
OHP
Transparent film cannot be loaded on the main body tray and Large Capacity
Unit. Specify [OHP] to a Bypass tray.