Oce CS9360, User Manual

Page: 104 / 146

CS9360 User’s Guide
5-104
User Type
Effect
<None> *1
Wave
<Fog> *1
<Fine&Fuzz> *1
<Fine&Fog> *1
A-S.Fine&Wave
B-S.Fine&Wave
PF Adjust
Pre Heater
Platen Heater
Dryer
Vacuum Fan
100 mm to <250 mm> to 500 mm
<Initial Print menu setting value>
50.0 mm
100 mm to <250 mm> to 500 mm
-5.00% to <0.00%> to 5.00%
Adjust Print
Confirm Pattern
Fine Pattern ALL
Rough Pattern
Fine Pattern A
Confirm Pattern
Rough Pattern
Fine Pattern
Fine Pattern B
Fine Pattern C
Fine Pattern D
Fine Pattern E
Fine Pattern F
Initial Print
Initial Change
Confirm Print
Micro Print
Micro Change
Quality 1
Quality 2
Quality 3
Quality 4
Graphics 1
Graphics 3
Graphics 4
<Graphics 2>
Banner 1
Banner 2
Banner 3
Banner 4
Off / <30 C> to 50 C
Off / <30 C> to 50 C
Off / <30 C> to 50 C
Low / Middle / <High>
Standard
Custom
<Type 1> to Type 30
Print Mode
Print Mode Effect Default Value
Quality 1-4 Fine&Fuzz
Graphics 1-2 Fine&Fuzz
Graphics 3-4 Fine&Fog
Banner 1-2
Fog
Banner 3-4 None
*1: The default value depending on print mode.