Oce CS9360, User Manual

Page: 81 / 146

CS9360 User’s Guide
4-81
Step 4:
Set the media holder plates by sliding them from both sides of the platen.
NOTE

Do not use the media holder plates for media whose thickness is 400
μ
m (0.4mm) or
thicker.
The media holder plate may interfere with the print head.
Step 5:
After installing the media holder plates, make sure that they do not interfere with the media as
it is fed through the printer.
CAUTION

If a media jams when using the media holder plates, the plates may be deformed.
When the media holder plates are deformed,

Do not remove the clogged media by force.

Stop using the printer.

Using the printer with deformed media plates may damage the grid roller or print heads.
Contact your local Océ representative.
NOTE

If there is interference with the media as it is fed through the printer after the media holder
plates have been installed, the media holder plates should not be used.
N°. Name
1 Roll media
2 Media holder plate
3 Media loading position
4 Platen
1
1
4
3
2
1
4
2
3