Oce CS9360, User Manual

Page: 54 / 146

CS9360 User’s Guide
3-54
3.4.2 Custom Adjustment Pattern
All patterns from A to F can be adjusted.
By performing this adjustment, all print modes will be adjusted.
This menu is made up with the following menus.
Step 1:
Print the confirmation pattern and check the amount of misalignment.
3.6.2.1 Custom Confirmation Pattern
Step 2:
Perform rough adjustment when the misalignment is big.
3.6.2.2 Custom Rough Adjustment Pattern
Perform micro adjustment when the misalignment is small.
3.6.2.3 Custom Micro Adjustment Pattern
NOTE

Perform rough adjustment first when the amount of misalignment cannot be judged.
Step 3:
Print the confirmation pattern and check if the printer is adjusted properly.
3.6.2.1 Custom Confirmation Pattern
Step 4: If the printer is not adjusted, go back to Step 2.
NOTE

When you are not satisfied with the result of rough adjustment, perform micro
adjustment.

For Micro Adjustment Pattern, select “Adjust pattern ALL” to adjust all patterns or “Each
Adjust pattern” to adjust patterns A to F separately.
3.6.2.3.1 Adj. PatternALL
3.6.2.3.2 Each Adjust Patterns
Menu Name Description Reference
Custom Confirmation Pattern Print the confirmation patterns A to F and
check the amount of misalignment.
3.6.2.1 Custom Confirmation Pattern
Custom Rough Adjustment Pattern Perform this adjustment when the
misalignment is big.Adjust all
confirmation patterns A to F.
3.6.2.2 Custom Rough Adjustment
Pattern
Custom Micro
Adjustment
Pattern Adj. PatternALL Perform this adjustment when the
misalignment is small.Adjust all
confirmation patterns A to F.
3.6.2.3.1 Adj. PatternALL
Each Adjust
Patterns Perform this adjustment when the
misalignment is small.Adjust all
confirmation patterns A to F.
3.6.2.3.2 Each Adjust Patterns