Oce CS9360, User Manual

Page: 33 / 146

CS9360 User’s Guide
3-33
Step 5:
Pull the roll media out about 1 m from the front media feed slot which is located inside of the
front cover.
Step 6: Rewind the roll media a little by rolling the flange on the roll media holder while holding the
edge of the media, and eliminate any slack or slant.
NOTE

If you set the roll media free while rewinding, the roll media will fall out from the media
feed slot on the rear of the product.

Confirm that the right edge of the roll media does not go beyond the loading mark.
If it does, it may affect print quality.
N°. Name
1 Roll media
2 Media feed slot
N°. Name
1 Roll media
2 Media loading mark
1
2
1
1
2