Oce CS9360, User Manual

Page: 19 / 146

CS9360 User’s Guide
2-19
2.1.2 Rear section
N°. Name Function
1 Roll media holder Load the roll media.
The flanges to attach roll media and the fixing levers to fix the roll media holders are
included.
2 Media feed slot Used for feeding media.
3 Ink cartridge slot Insert the ink cartridge.
4 Media guide Used for feeding media smoothly when the media is set or printed.
The heater (pre-heater) to warm up the media is installed inside.
5 AC inlet Used for connecting the power cable.
6 Network interface cable
connector Connects a network interface cable.
7 Waste fluid valve Open and close when discharging the waste fluid from the waste fluid tank.
It is normally closed.
2
7
1
5 6 1
4
3