Oce CS9090, User Manual

Page: 89 / 177

Chapter 5: Handling the printer
AP-75036 - Revision 1.3 – 20/03/06 89 User’s Guide CS9000 series
5.4.1.7 Thin Out: Ink amount menu
Set the amount of ink discharged while printing, according to the media type.
Setup items Parameters Description
Amount of ink 50 %-< 100%> Use the following keys to change the amount of ink.
• [F2] key: to increase the setup value.
• [F4] key: to decrease the setup value.
• [ENTER] key: to confirm the setup value
• [CANCEL] key: to cancel the setup value
5.4.1.8 Ink dry time menu
Set the waiting period between the end of operation and the start of next printing in order to let the printed
media dry.
Setup items Parameters Description
InkDryTime 0 to <30 sec. > to 270 sec. to 60 min.
To change the InkDryTime by operating the
following keys.
• [F2] key: to increase the setup value.
• [F4] key: to decrease the setup value.
• [ENTER] key: to confirm the setup value
• [CANCEL] key: to cancel the setup value
5.4.1.9 Head Height menu
Set the distance (head height) between the print head and the media.
Head height can be changed to three levels according to media thickness.
Setup items Parameters Description
Low When using media with a thickness of 80µm to 300µm
Middle When using media with a thickness of 300µm to 700µm
High When using media with a thickness of 700µm to 1000µm
HeadHeight
- (1 µm = 0,001 mm)
Notes
Set the height of the head in relation to the thickness of the media.
•
If the setting is set to "High" and the print is created on thin media, good quality print results will not be
achieved.
•
If the setting is set to "Low" and thick media is used, the media and print head will come into contact
and may result in damage to the product.