Oce CS9090, User Manual

Page: 58 / 177

Chapter 4: Preparing for a job
AP-75036 - Revision 1.3 – 20/03/06 58 User’s Guide CS9000 series
4.6.4 Using media retainers
There are 2 media retainers enclosed in-the-box. Please follow the procedure below to use them properly.
Step 1 :
Power on the machine.
Step 2 :
Be sure that the media initialize is done correctly.
Step 3 :
Open the front cover.
Step 4 :
Install the media retainer (left, right) to both sides of the roll media. First attach the rear side of
the media retainer to the rear of the print platform.
Step 5 :
Push the front side of the media retainer until it clicks.
Step 6 :
Move the media retainers over the edges of the media.
Step 7 :
Close the front cover and set automatic media cut OFF otherwise the knife will strike against the
mediaretainers.
Carefully pull the media-retainer straight to you, and then lift it upwards when you want to remove them.