Oce CS9090, User Manual

Page: 101 / 177

Chapter 5: Handling the printer
AP-75036 - Revision 1.3 – 20/03/06 101 User’s Guide CS9000 series
5.4.2.17 Overwrite menu
Set the printing method for areas where figures overlap on the printing data.
Setup items Parameters Description
<Last> The colour of the print created afterward is given priority.
Mix The colours of overlapping areas are mixed and printed.
Overwrite
- To shift to the previous hierarchy menu.
5.4.2.18 Halftone menu
To set the screening method. When creating prints of MH-GL/GL2 (vector) data and RTL-PASS (raster) data
that has not been converted into binary,
Setup items Parameters Description
<Speed> To use the error diffusion matrix to perform rapid screening.
Quality High quality screening is performed according to the method of minimal
average error.
Thin When printing data created for a competitor's printer, make this setting
if the "Speed" setting could result in dark prints.
Halftone
- To shift to the previous hierarchy menu.
5.4.2.19 Layout setup menu
Make various settings on layout function.
Notes
The layout function automatically determines the size of printing data sent from the computer, and then
determines the amount of roll media required without wasting media.
If sheet media has been loaded, the layout function is disabled.
Setup items Parameters Description
Direct To set the layout method for printing data.
Joint Makes settings for stitching print.
CtPos To set the media cutting position after printing has been completed.
Layout
- [CANCEL] key: To shift to the previous hierarchy menu.