Oce CS9090, User Manual

Page: 66 / 177

Chapter 4: Preparing for a job
AP-75036 - Revision 1.3 – 20/03/06 66 User’s Guide CS9000 series
4.8.3 Connecting the Centronics interface
The procedure for connecting the Centronics interface is explained below.
To connect the printer to your computer, follow the steps below.
Step 1 :
Turn off the printer and your computer.
Step 2 :
Plug the cable connector of the interface cable into the interface connector at the back of the
printer. Squeeze the wire clips together until they lock into place.
1 Centronics interface connector
2 Interface cable
Step 3 :
Plug the other end of the cable into the computer's port.
Notes
Refer to your computer's manual for the procedure to connect to your computer.