Oce Arizona 180 GL, User Manual

Page: 54 / 268

#
A job's vertical and horizontal offset parameters can be changed with
the mouse wheel when the mouse cursor is positioned over the field.
Rotate the mouse wheel up or down increments or decrements offset
at the rate of one unit per notch. Hold the right mouse button and
rotate the wheel increments or decrements at the rate of 10 units per
notch. An alternate method to change parameter values is to click on
the field and this brings up an onscreen keyboard so you can click on
the numbers required. You can also use Preview to drag an image to
the desired position. Offsets
Displays information about the print job that is currently selected:
•
Print Mode - Print modes are selected in ProductionHouse or
PosterShop: Express, Production, Quality, Quality-Layered, Fine
Art, or High Definition mode. See "Print Modes Explained" below
for details of each mode.
• Direction - Bidirectional and Forward or Reverse unidirectional
printing.
• Overprints - If the Overprint count is set to greater than 0 (zero),
the printer will re-print the image again on the same piece of media.
• Copies - use the mouse to increase or decrease.
• Type - Print Method - Flatbed or Roll.
• Media - Media that was selected in ProductionHouse.
• Notes - Appears only if a note was specified for the job. Notes are
entered in the ONYX software.
Print Param-
eters
Print Modes Explained
•
Express mode provides faster printing but image quality depends on all nozzles jetting
ink. It is best with images that do not have large areas of solid color or high saturation.
• Express Plus provides a more uniform gloss than Express mode. Image quality can
vary with media and image as well as nozzle conditions with both Express modes.
Express-Plus is exclusive to the 318 GL. On a 318 GL this field will have a pull-down
menu that allows you to select between Express and Express Plus if you want to change
how it was configured in your ONYX software.
• Fine Art is used when details are important and speed is not an issue. Images with
solid colors look more uniform so it is a good choice if your image contains text or
fine details and also solid colors.
•
High Definition provides higher resolution with more detail than Fine Art, especially
with very small text or fine lines. This mode is only available with the Arizona 360
GT/XT.
• Quality is suitable for a wide range of image types and media support. When Quality
mode is set, this field will have a pull-down menu that allows you to select Quality-
Chapter 4 - How to Navigate the User Interface 54
Print Job Control Module