Oce Arizona 180 GL, User Manual

Page: 169 / 268

4.
Once that is done, replace path in the group above the image and clipping layers. Ensure
that Overprint is turned on.
[127] Replace path in Group
5.
Save the file.
Note:
In testing, we have found the .eps file format to be the best. However, Postscript and
PDF files will work as well, but may require some additional setup. Make sure that when
you save the file, "Preserve Overprints" is enabled.
It is also possible and sometimes preferable, to print directly from Illustrator to Rip-
Queue. For instructions on how to do this, see the Onyx web site for a document called
"Printing From a Mac" (it also contains generic information on printing from Windows-
based systems).
6.
Open the file in ProductionHouse.
How to Set Up a File for Preflight's Spot Layer Tool
The Spot Layer Tool in Preflight can also make masks for data, and in some cases may
be the preferred method of spot layer creation. To ensure that mask selection is made in
Preflight without selecting those parts of your image that are of the same color, it is nec-
essary to create a layer in Illustrator to serve as the mask.
Chapter 9 - How to Work With White Ink 169
How to Create White Spot Data in Illustrator