Oce 1010N - B/W Laser Printer, Operation Manual

Page: 163 / 182

USB Interface
C-6
C.2 USB Interface
This printer supports the USB (Universal Serial Bus) Revision 1.1
standards. USB interface specifications and interface signals are as
follows.
C.2.1 Specifications
Basic specification
Complies with the USB Revision 1.1 standards.
Connectors
Printer: B-type receptacle (female) with upstream port
Cable: B-type plug (male)
Cable
Use shielded cable that complies with the USB Revision 1.1 standards and
not longer than 5 meters (16 feet).
Transfer Mode
Full speed (max. 12 Mbps)
Power Control
Self-power device
C.2.2 Interface Signals
Table C.2 USB Connection Pin Assignment
Pin
Pin Pin
Pin Signal
Signal Signal
Signal Description
Description Description
Description
1 Vbus Power supply (+5 V)
2 D- Data transmission
3 D+ Data transmission
4 GND Signal ground
Shell Shield