Oce 1010N - B/W Laser Printer, Operation Manual

Page: 125 / 182

Indicators
4-12
Memory card err20
The printer has halted because you attempted to insert/remove a
The printer has halted because you attempted to insert/remove a The printer has halted because you attempted to insert/remove a
The printer has halted because you attempted to insert/remove a
memory card into/from the printer slot while the printer power is
memory card into/from the printer slot while the printer power is memory card into/from the printer slot while the printer power is memory card into/from the printer slot while the printer power is
on.
on. on.
on.
Turn the power switch off and then on to restart the printer.
Make sure to turn the printer power off before inserting/
removing a memory card.
(No indication
patterns available)
Format error
Memory card
This message appears when the printer is in the ready state and
This message appears when the printer is in the ready state and This message appears when the printer is in the ready state and
This message appears when the printer is in the ready state and
the memory card is not formatted, and therefore cannot be read or the memory card is not formatted, and therefore cannot be read or the memory card is not formatted, and therefore cannot be read or the memory card is not formatted, and therefore cannot be read or
written.
written. written.
written.
Format the memory card.
Indicator Indicator Indicator Indicator Remote Operation Remote Operation Remote Operation Remote Operation
Panel display
Panel display Panel display
Panel display
Corrective Action Corrective Action Corrective Action Corrective Action
Note