Oce 1010N - B/W Laser Printer Operation Manual Download Page 151

Page: 151 / 182

Expansion Memory Installation

B-4

DIMM to be used

Contact your Kyocera Mita dealer for information on purchasing the

DIMM that are best suited for use with this printer.
Either an 8 MB, 16 MB, 32 MB, 64 MB, or 128 MB DIMM can be used for

memory expansion.

Installing the DIMM

Insert the DIMM into the socket as follows:

Turn the printer’s power off, then unplug the printer’s power cable

and disconnect the printer from the host computer.

Remove the screw from the rear of the printer.

Remove the side cover as shown in the figure.

Side Cover

Summary of Contents for 1010N - B/W Laser Printer























































































































































































Search results

Summary of Contents for 1010N - B/W Laser Printer

Reviews:

Related manuals for 1010N - B/W Laser Printer

Brands by name

Popular brands

Oce 1010N - B/W Laser Printer, Operation Manual

Search results

Summary of Contents for 1010N - B/W Laser Printer

Reviews:

Related manuals for 1010N - B/W Laser Printer

Brands by name

Popular brands