Oase BioTec ScreenMatic2, Operating Instructions Manual

Page: 29 / 326

- EN -
29
3.5.1 Opening the container
D
x
BioTec ScreenMatic² 40000/60000: Release the locking clips, lift up the cover and remove.
x
BioTec ScreenMatic² 140000: Lift the cover using the handles and remove.
– Screw the handles onto the cover. The handles are not fitted on delivery.
Note!
Only operate the unit with the container cover in place.
3.5.2 Hinging the screen holder up/down
How to proceed:
E
To hinge up/open
1. Remove the debris tray.
2. Hinge up the distributor extension.
3. Hinge up the screen holder with the ScreenMatic rotating screen unit.
To hinge down/close
4. Carefully hinge down the screen holder.
5. Push the distribution extension down until it audibly engages.
6. Replace the debris tray.
4 Installation and connection
4.1 Installation planning
F, G
Attention! Dangerous electrical voltage.
Possible consequences: Death or severe injuries caused by electric shock from electrical units operated in
or near water.
Protective measures for accessible ponds:
x
Only use electrical units or installations with a rated voltage of U
AC
d
12 V or U
DC
d
30 V in the water.
x
Electrical installations with a rated voltage of U
AC
> 12 V or U
DC
> 30 V must be located at a distance of at
least 2 m from the water.
Protective measures for non-accessible ponds:
x
Electrical installations with a rated voltage of U
AC
> 12 V or U
DC
> 30 V must be located at a distance of at
least 2 m from the water.
Note:
Use suitable transport and lifting aids to transport and install the unit.
The unit weighs more than 25 kg.
ĺௗ
Technical data)
Distance from the pond
Electrical components of the filter system operate with a rated voltage of U
DC
௔ ௔௔9
The supply voltage is
supplied via an external transformer connected to the mains.
x
Filter system without UVC clarifier fitted:
– The filter system can be installed directly next to the water. No minimum distances apply. The trans-
former must be located at a distance of at least 2 m from the water.
x
Ponds that can be accessed by persons, filter systems with UVC clarifier fitted:
– The filter system and transformer must be located at a distance of at least 2 m from the water.
x
Ponds that cannot be accessed by person
VILOWHUV\VWHPVZLWK2$6(89&FODULILHURIWKH%LWURQ௔(FRVHULHV
– The filter system may be installed directly next to the water No minimum distances apply. The trans-
former must be located at a distance of at least 2 m from the water.
x
Ponds that cannot be
DFFHVVHGE\SHUVRQVILOWHUV\VWHPVZLWK2$6(89&FODULILHURIWKH%LWURQ௔&RU
Vitronic series:
– The filter system and transformer must be located at a distance of at least 2 m from the water.