- IT -
101
4.4
Collegare uscita
x
Utilizzare tubazioni idonee.
x
Non utilizzare tubazioni a gomito perpendicolare. La massima efficienza la possiedono i gomiti con un'ango-
lazione massima di 45°.
x
In caso di gelo, l'acqua ferma non riesce a defluire e lascia scoppiare le tubazioni. Posare dunque le tuba-
zioni e i tubi flessibili con un'inclinazione (50 mm/m) in maniera che si possano svuotare.
x
'LPHQVLRQLGHOOHWXED]LRQLĺௗ
Dati tecnici)
Montaggio dello scarico DN 110
BioTec ScreenMatic² 140000: Alla consegna, l'uscita non è montata.
Condizione:
x
,OUHFLSLHQWHqDSHUWRĺௗ
Apertura del recipiente)
Procedere nel modo seguente:
J
1. Applicare l'O-ring sullo scarico
2. Applicare dall'esterno lo scarico sulla parete del contenitore.
– La marcatura a forma di nasello deve essere rivolta verso l'alto e allineata con la configurazione dei fori.
3. Fissare lo scarico dall'interno con viti a testa bombata.
– Per far sì che la guarnizione poggi in modo uniforme, stringere tutte le viti diagonalmente agendo sull'av-
vitatore a batteria. Riserrare le viti agendo su un cacciavite a stella.
4.5
Collegamento dello scarico dello sporco
Attraverso lo scarico dello sporco con valvola di intercettazione sulla parte bassa del serbatoio è possibile, se
necessario (pulizia, riparazione, svernaggio), scaricare l'acqua contenuta nel serbatoio.
x
Collegare le tubazioni e condurre l'acqua sporca ad es. nelle fioriere o nella canalizzazione delle acque gri-
gie.
x
'LPHQVLRQLGHOOHWXED]LRQLĺௗ
Dati tecnici)
4.6
Creazione del collegamento elettrico
Procedere nel modo seguente:
K
1. Infilare il cavo di allacciamento attraverso l'apertura nella parete del recipiente e poi chiudere quest’ultima
con il tappo di tenuta.
– Lasciare nel recipiente il cavo di collegamento ad una lunghezza tale che all'apertura dell'unità Screen-
Matic il cavo non si tenda.
– Evitare l'ingarbugliamento del cavo nel recipiente.
2. Infilare la spina del cavo di collegamento sulla boccola del trasformatore e stringere a mano il dado a ri-
svolto.
5
Messa in funzione
Nota!
Rimuovere la pellicola protettiva dai tubi di substrato e inserire i tubi di substrato nel recipiente.
ĺௗ
Pulizia/sostituzione del vaglioScreenMatic)
x
Alla consegna, i tubi di substrato sono imballati in pellicola protettiva.
x
Prima della prima messa in funzione, pulire a fondo il laghetto in maniera da non sovraccaricare il sistema
di filtraggio a causa di acqua troppo sporca. Per la pulizia, OASE raccomanda di usare l'aspiratore per fan-
ghi PondoVac.
– In genere la pulizia non è necessaria se il laghetto è stato appena costruito.
x
Il sistema filtrante deve rimanere acceso 24 ore durante la stagione di attività del laghetto.
Summary of Contents for BioTec ScreenMatic2
