PART 2 - REMOVING THE OLD AND REATTACHING THE NEW DRIVE STRAPS - CONT’D
Insert the strap into the slot behind the clamp pin paying attention to the correct direction the drive strap
must be attached to the spool ie open end to the right/closed length to the left. This may require the use
of a small screwdriver or similar instrument to help push the strap through this slot.
Push the strap through until it is in line with the edge of the machined flat on the drive spool pulley.
Using a 3mm Allen key tighten the grub screw onto the clamping pin until it firmly locks the end of the
drive strap in place.
Turn the spool to wrap the drive strap in an anti-clockwise direction onto the drive spool pulley until it
becomes tight.
MAINTENANCE
Summary of Contents for Rowing Simulator
Page 1: ...OPERATION MANUAL...
