MOVING
The Oartec has wheels for easy relocation and can be moved in either the folded or unfolded mode. When
folded the Oartec is narrow enough to fit through doorways to be moved from room to room or stored.
To move the location of the machine carefully raise the seat rail above a 30 degree angle to engage the
wheels on the ground.
At approximately 45 degrees to the floor, the machine is resting completely on the wheels and can be
steered to a different location for storage or use.
STORAGE
When not in use the Oartec can be stored stood vertically upright to maximize the amount of space
available in the room.
Care must be taken to ensure that the Oartec is on solid and level ground and away from the general
traffic flow of the room when stood vertically to prevent the simulator being toppled over by accident.
Due to the substantial weight of the simulator and the possibility of injury and damage if it were to fall, it is
very important to check the stability of the machine before leaving it in the upright position.
OPERATION
Summary of Contents for Rowing Simulator
Page 1: ...OPERATION MANUAL...
