HEART RATE MONITORING
The Oartec workout monitor uses the Polar heart rate transmitter and receiver to display the heart rate
in the TECH field on the screen. This function overrides all other functions in this field.
To monitor heart rate during a workout plug the Polar receiver into port 2 located next to the flywheel
sensor cable. Once the receiver accepts the signal the heart rate will display and the heart icon flash for
each heartbeat.
PORTS
Located on the back of the monitor there are four ports for specific cable connection.
The first small port is for the flywheel sensor cable (labelled Sensor Port)
The second small port is for the Polar Heart Rate receiver.(labeled HR Port)
The USB port is for connecting the monitor to a computer.
The Network port is for connecting to other Oartec monitors.
BATTERIES
The Oartec Workout Monitor takes 4 AA standard batteries and access to the battery compartment is
by sliding open the battery cover as shown.
WORKOUT MONITOR
Summary of Contents for Rowing Simulator
Page 1: ...OPERATION MANUAL...
