Nvidia DGX Station User Manual Download Page 8

Page: 8 / 105

Introduction to the NVIDIA

DGX Station

™

DGX Station

DU-08255-001 _v4.6 | 2

1.1.

What's in the Box

‣

DGX Station

‣

Accessory boxes containing:

‣

Quick Start Guide

‣

AC power cable

‣

3 DisplayPort

™

1.2 to HDMI 2.0 adapters

‣

USB recovery flash drive containing a backup copy of the operating system image and

CUDA toolkit

‣

DVD-ROM containing source code of open-source software installed on the DGX

Station

‣

Toxic Substance Notice and Safety Instructions

‣

Declaration of Conformity

‣

Repacking Instructions/Intra-Transit

Inspect each piece of equipment in the packing box. If anything is missing or damaged, contact

your supplier.

1.2.

DGX OS Desktop Software Summary

The DGX OS Desktop software that is supplied with the DGX Station includes the software that

you need for downloading and running containers for deep learning frameworks. The software

is already installed on the DGX Station, except where licensing requirements mandate that the

software be supplied separately. Any software that must be supplied separately is installed

automatically when the DGX Station is first powered on.
For details about the DGX OS Desktop software, refer to

DGX OS Desktop Release Notes

Note:

You can replace the DGX OS Desktop software that is supplied with the DGX Station by

installing the DGX software for Red Hat Enterprise Linux or CentOS. For instructions, see:

‣

DGX Software for Red Hat Enterprise Linux 7 - Installation Guide

‣

DGX Software for CentOS - Installation Guide

Summary of Contents for DGX Station










































































































Search results

Summary of Contents for DGX Station

Reviews:

Related manuals for DGX Station

Brands by name

Popular brands

Nvidia DGX Station, User Manual

Search results

Summary of Contents for DGX Station

Reviews:

Related manuals for DGX Station

Brands by name

Popular brands