manualshive.com logo in svg

Nvidia DGX Station, User Manual

Share
Download
Nvidia DGX Station User Manual Download Page 69

Maintaining and Servicing the NVIDIA DGX Station

DGX Station

DU-08255-001 _v4.6   |   63

of the image is available, prepare a bootable installation medium that contains the current
software image as explained in the following topics:

‣

Obtaining the DGX Station Software ISO Image and Checksum File

‣

Creating a Bootable Installation Medium

When you have a bootable installation medium that contains the current software image,
install the image as explained in 

Installing the DGX Station Software Image from a USB Flash

Drive or DVD-ROM

.

Note:

 

Updates to the DGX Station software might have been made available after the latest

available ISO image file was created. To ensure that you have the latest DGX Station software,
including security updates, check for updates and install any available updates after you
restore the software image. For more information, see 

Upgrading Within the Same DGX OS

Desktop Major Release

.

4.8.1.  Obtaining the DGX Station Software ISO

Image and Checksum File

To ensure that you restore the latest available version of the DGX Station software image,
obtain the current ISO image file from NVIDIA Enterprise Support. A checksum file is provided
for the image to enable you to verify the bootable installation medium that you create from the
image file.

 1. Log on to the 

NVIDIA Enterprise Support (https://nvid.nvidia.com/dashboard/)

 site.

 2. Click the 

Announcements

 tab to locate the download links for the DGX Station software

image.

 3. Download the ISO image and its checksum file and save them to your local disk.

The ISO image is also available in an archive file. If you download the archive file, be sure

to extract the ISO image before proceeding.

4.8.2.  Creating a Bootable Installation Medium

After obtaining an ISO file that contains the DGX OS Desktop software image from NVIDIA
Enterprise Support, create a bootable installation medium, such as a USB flash drive or DVD-
ROM, that contains the image.

‣

If you are creating a bootable USB flash drive, follow the instructions for the platform that
you are using:

‣

On Ubuntu Desktop, see 

Creating a Bootable USB Flash Drive by Using Startup Disk

Creator

.

‣

On Windows, see 

Creating a Bootable USB Flash Drive by Using Akeo Rufus

.

Summary of Contents for DGX Station










































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands