manualshive.com logo in svg

Nvidia DGX Station, User Manual

Share
Download
Nvidia DGX Station User Manual Download Page 74

Maintaining and Servicing the NVIDIA DGX Station

DGX Station

DU-08255-001 _v4.6   |   68

3299+1 records out

3459317760 bytes (3.5 GB, 3.2 GiB) copied, 164.369 s, 21.0 MB/s

3992706625 3459317760

 4. Obtain the checksum value from the checksum file.

$ 

cat 

checksum-file

checksum-file

The path, including the file name, to the checksum file.

This example obtains the checksum value for the image 

DGXStation-3.1.2_56d4a9.iso

from the checksum file 

DGXStation-3.1.2_56d4a9.crc

 in the current working directory.

$ 

cat DGXStation-3.1.2_56d4a9.crc

3992706625 3459317760 DGXStation-3.1.2_56d4a9.iso

If the value obtained from the checksum file matches the value computed from the image,

the integrity of the installation medium has been successfully verified.

4.8.3.2.  Verifying a Bootable DVD-ROM

 1. Load the DVD-ROM into an optical drive connected to your Linux system.
 2. Compute the checksum of the image on the DVD-ROM.

$ 

cksum < /dev/sr0

This example computes the checksum of an image on a DVD-ROM.

$ 

cksum < /dev/sr0

3992706625 3459317760

 3. Obtain the checksum value from the checksum file.

$ 

cat 

checksum-file

checksum-file

The path, including the file name, to the checksum file.

This example obtains the checksum value for the image 

DGXStation-3.1.2_56d4a9.iso

from the checksum file 

DGXStation-3.1.2_56d4a9.crc

 in the current working directory.

$ 

cat DGXStation-3.1.2_56d4a9.crc

3992706625 3459317760 DGXStation-3.1.2_56d4a9.iso

If the value obtained from the checksum file matches the value computed from the image,

the integrity of the installation medium has been successfully verified.

4.8.4.  Installing the DGX Station Software Image

from a USB Flash Drive or DVD-ROM

Before installing the DGX Station software image, ensure that you have a bootable USB flash
drive or DVD-ROM that contains the current DGX Station software image.

CAUTION:

 Installing the DGX Station software image erases all data stored on the OS SSD. The

/home

 partition, where all users' documents, software settings, bookmarks, and other personal

files are stored, resides on the OS SSD and will be erased. However, if you chose to install the
DGX Station software and preserve the RAID array contents, persistent data stored in the RAID
array is unaffected.

 1. Shut down the DGX Station.

Summary of Contents for DGX Station










































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands