Nvidia DGX Station User Manual Download Page 31

Page: 31 / 105

Upgrading DGX OS Desktop Software on DGX Station

DGX Station

DU-08255-001 _v4.6 | 25

b). If the list contains only packages that you want to remove, enter

to continue with the

upgrade.

When the system upgrade is complete, you are prompted to restart the system.

System upgrade is complete.
Restart required
To finish the upgrade, a restart is required.

If you select 'y' the system will be restarted.
Continue [yN]

10.In response to the prompt, enter

to restart the system.

After the system is restarted, the upgrade process takes several minutes to perform some

final installation steps.

11.Confirm the Linux kernel version.

uname -a

For example, for an upgrade to DGX OS Desktop 4.0.4, the Linux kernel version is at

minimum

4.15.0-36-generic

Linux es-DGX-Station 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC

2018 x86_64 x86_64 x86_64 GNU/Linux

For the minimum Linux kernel version of the release that you are upgrading to, consult the

release notes for that release.

12.Confirm the NVIDIA Graphics Drivers for Linux version.

nvidia-smi

For example, for an upgrade to DGX OS Desktop 4.0.4, the NVIDIA Graphics Drivers for

Linux version is 410.79:

Tue Dec 11 18:03:56 2018

+------------------------------------------------------------------------+

| NVIDIA-SMI 410.79 Driver Version: 410.79 CUDA Version: 10.0 |

|-----------------------------+--------------------+---------------------+

...

For the NVIDIA Graphics Drivers for Linux version of the release that you are upgrading to,

consult the release notes for that release.

3.3.

Opting in to DGX OS Desktop Patch

Updates

Patch updates are package upgrades to individual components in DGX OS Desktop software

that are delivered through the DGX OS Desktop update repository. You must opt in to receive

patch updates. When you opt in, any available patch updates are installed. After you opt in, the

distribution for DGX OS Desktop patch updates is added to your configured sources from which

packages are obtained.
Ensure that the following prerequisites are met:

‣

You are logged in to your Ubuntu desktop on the DGX Station as an administrator user.

‣

Your DGX Station is upgraded to DGX OS Desktop release .

Summary of Contents for DGX Station










































































































Search results

Summary of Contents for DGX Station

Reviews:

Related manuals for DGX Station

Brands by name

Popular brands

Nvidia DGX Station, User Manual

Search results

Summary of Contents for DGX Station

Reviews:

Related manuals for DGX Station

Brands by name

Popular brands