Nvidia DGX Station User Manual Download Page 41

Page: 41 / 105

Maintaining and Servicing the NVIDIA DGX Station

DGX Station

DU-08255-001 _v4.6 | 35

4.3.

Since DGX OS Desktop 4.4.0:

Checking the Health of and Collecting

Troubleshooting Information for the

DGX Station

Starting with release 4.4.0, use NVIDIA System Management (NVSM) to check the health of and

collecting troubleshooting information for the DGX Station.
For information about how to use NVSM to perform these tasks, see the relevant instructions
in the NVSM documentation.

Task

Instructions

Checking the health of the DGX Station

Show Health in NVIDIA System Management User
Guide

Collecting troubleshooting information for the
DGX Station

Dump Health in NVIDIA System Management
User Guide

For information about how to perform these tasks for earlier releases, see the following
topics:

‣

DGX OS Desktop 4.3.0 and Earlier: Checking the Health of the DGX Station

‣

DGX OS Desktop 4.3.0 and Earlier: Collecting Information for Troubleshooting the DGX
Station

4.4.

DGX OS Desktop 4.3.0 and

Earlier: Collecting Information for

Troubleshooting the DGX Station

Note:

Starting with release 4.4.0, the tool to collect troubleshooting information (

nvsysinfo

)

tool is replaced by NVIDIA System Management (NVSM). For information about how to use
NVSM to perfrom this task, see

Dump Health in NVIDIA System Management User Guide

To help diagnose and resolve issues, the DGX Station provides a tool to collect troubleshooting
information for NVIDIA Support Enterprise Services.

The tool verifies basic functionality and performance of the DGX Station and collects the
following information in an xz-compressed tar archive:

‣

Log files

Summary of Contents for DGX Station










































































































Search results

Summary of Contents for DGX Station

Reviews:

Related manuals for DGX Station

Brands by name

Popular brands

Nvidia DGX Station, User Manual

Search results

Summary of Contents for DGX Station

Reviews:

Related manuals for DGX Station

Brands by name

Popular brands