Nuova Simonelli TALENTO, User Handbook Manual

Page: 67 / 192

65
EN
DISPLAY CAUSA EFFECT SOLUTION NOTE
WASHING CYCLE
IS NEEDED
The set number of
cycles programmed
before washing,
has been exceed-
ed.
The message will
appear on the
display but the
machine will contin-
ue to deliver drinks.
Do a washing
cycle (see para-
graph WASHING
THE DELIVERY
UNIT AND MILK
FOAMER).
UPPER PISTON
MOTOR
GROUP ALARM
During the group
handling phase,
the upper piston
exceeded maxi-
mum set time by
10 seconds before
recognizing motor
pickup.
The control unit will
halt whatever cycle
is on by turning off
both the movement
actuator and those
for drink delivery;
the operator will not
be able to make
selections on the
keyboard.
Open and close the
machine door.
If the alarm reapp
ears after the sec-
ond time of taying,
call the Service
Technician.
HEATER FILLING
ALARM
The heater filling
stage has exceed-
ed the 3 minute
maximum time;
the probe level is
uncovered.
The machine will
stop.
If the alarm reapp
ears after the sec-
ond time of taying,
call the Service
Technician.
TURBINE ALARM
For alarm found
the display control
unit alternates with
the message about
drink under way
with the error mes-
sage associated
with this function.
Eg:
DOSING ERROR
The volume coun-
ter will not send
any impulses to the
control unit for 5
seconds.
The delivery will
continue for up to
60 seconds or for
as long as any of
the coffee based
drink keys are
pressed.
Open and close the
machine door.
The control unit will
repeat the machine
starting up proce-
dure.
In case the alarm
persists, the
machine can be
used as a manual
appliance.
• Press the select-
ed key to start the
dosing;
• Once the desired
dose has been
delivered in the
cup, press the
same key to halt
the dose being
delivered.
Call the Service
Technician.
AUTOwASHING ALARM
XXXXXX
GROUP ALARM
FILLING ALARM