Nuova Simonelli TALENTO, User Handbook Manual

Page: 57 / 192

55
EN
(YES – NO) function. With the SEQUENTIAL
HEATING function enabled, YES , the control board
will first heat up the coffee heating element and then
the services heating element; with the
SEQUENTIAL
HEATING function disabled, NO , the control board
will heat the two boilers at the same time.
4.11 PROG ON OFF (Programming automatic
switch on/off)
This is to programme the automatic ON/OFF times
for the machine.
The default setting is for the machine to be set to
“STANDBY” every day of the week and therefore,
it needs to be switched on/ off using the ON/OFF
key.
Pressing ENTER it is possible to enter the
sub menu and the display will read as follows:
The keys are used to view the set-
tings for each day of the week.
Press ENTER to set the required day of the
week; the
keys are used to select
the hour and minutes for switching on and the hour
and minutes for switching off.
menu; the keys are used to select the
time to be set. E.g. TIME 1, pressing ENTER
it is possible to enter the sub menu; the
keys are used to select the time,
HOURS and minutes MIN at which the wash alarm
must appear. Press
ENTER and the
keys to set the time HOURS and minutes
MIN.
Press
ENTER to confirm settings.
At the set time or times, the display will read WASH ;
this will disappear once the wash has been com-
pleted. If 00 is set for HOURS and 00 for MIN at the
TIMES 1,2,3,4, the alarm is not enabled.
4.8 WASHING WARNING (Wash alarm cycles)
Pressing ENTER it is possible to enter the
sub menu. This programmes the number of cycles
after which the group wash warning is displayed. The
keys are used to increase/decrease
the number of cycles for viewing the group wash
message (min. 50 – max. NO LIMIT).
Press
ENTER to confirm settings.
4.9 MILK CLEAN WARNING
(Milk clean warning)
Pressing ENTER it is possible to enter the
sub menu. This programmes the number of hours
from the last milk beverage being dispensed, after
which the cappuccino maker cleaning warning is
displayed.
The
keys are used to increase /
decrease the number of hours before the cappuc-
cino maker clearing message is displayed (min. NO
LIMIT – max. 12H).
Press
ENTER to confirm settings.
4.10 SEQUENTIAL HEATING
(Sequential heating)
Pressing ENTER it is possible to enter the
sub menu. The keys are used to
enable/disable the
SEQUENTIAL HEATING
MONDAY
MONDAY
ON HOURS
MONDAY
OFF HOURS
MONDAY
DAY OFF
MONDAY
ON MIN
MONDAY
OFF MIN