Nugen S10KS, Operator'S Maintenance Manual

Page: 25 / 64

OPERATOR & MAINTENANCE MANUAL
PAGE ‐ 21
3.4.3 AMF 25 Controller
TABLE 5: PUSH BUTTONS
REF NAME DESCRIPTION
1
START button. Works in MAN mode only. Press this button
to initiate the start sequence of the engine.
2
STOP button. Works in MAN mode only. Press this button
to initiate the stop sequence of the gen-set. Repeated
pressing or holding the button for more than 2s will cancel
the current phase of stop sequence (ramping the power
down or cooling) and the next phase will continue.
3
FAULT RESET button. Use this button to acknowledge
alarms and deactivate the horn output. Inactive alarms will
disappear immediately and status of active alarms will be
changed to "confirmed" this will allow the alarm to reset
when the fault condition is alleviated.
4
HORN RESET button. Use this button to deactivate the
horn output without acknowledging the alarms.