Nugen S10KS, Operator'S Maintenance Manual, Page: 14 / 64

OPERATOR & MAINTENANCE MANUAL
PAGE ‐ 10
3. Specifications and Parts Introduction
3.1 Specifications
3.1.1 Use
The generator can be used as a power supply for two main types of services:

Continuous service – Used for the production of electrical energy for varied
purposes: motion force, lighting, heating, etc.

Emergency service – Used to rectify main supply interruptions or to face
consumption peaks.
3.1.2 Main Specifications

Reliable and powerful Perkins engine and Leroy Somer alternator.

Operation: Using the advanced Intelilite AMF 25 Controller, allows for simple
and convenient fingertip control through the front control panel or by PC
connection. The Intelilte AMF 25 Controller also monitors the engine and the
alternator displaying all warning alarms and performing automatic shutdowns on
fault signals.

50°C designed cooling system.

The engine and alternator have rubber av mounts installed to reduce vibration.

High anti ‐ corrosion protection.

Easy maintenance: Wide doors are designed to allow easy access for
maintenance and cleaning.

Super quiet performance: Acoustic insulation installed inside all of the panels
and doors and an oversized muffler to minimise noise.

Engine and alternator can resist any direct impact stress.

Control cabinet can reach IP66 protection. Canopy can reach IP44 protection.

Double bunded fuel tank protection.

Leak proof base: All drain points are located on the inside.

Muffler with spark arrester.
3.1.3 Design Ambient Conditions

Installation: Outdoors and indoors in a well ‐ ventilated area.

Temperature: ‐ 15°C to 50°C.

Relative humidity: Less than 80%.

Altitude: To a maximum of one thousand (1000) metres above sea level.