
79
Fil
e
management
•
Before using, remove the cap of SD card reader SC01.
•
Pull or insert 30-pins plug or SD card/microSD card horizontally and slowly
not to give excessive force.
1
Insert an SD card/microSD card to the SD card reader SC01
(
a
).
•
Attach an SD conversion adapter before connecting microSD card.
•
Insert the SD card/microSD card with the metal surface facing down
horizontally.
•
Insert to the end of the slot until it clicks.
2
Insert 30-pins plug of the SD card reader SC01 facing the
"SAMSUNG" printed side up to the external connection
jack of the terminal (
b
).
My files starts when the terminal recognizes the SD card/microSD card.
3
When you end using,
on the status bar
→
Tap a
notification.
•
When "USB device removed safely" appears, you can pull out the SD
card reader SC01.
•
Do not remove the SD card reader SC01 or SD card/microSD card
during data transmission. Data may be damaged.
•
Pull or insert 30-pins plug or SD card/microSD card horizontally and
slowly not to give excessive force.
•
Insert SD card/microSD card into the SD card reader SC01, then
connect the SD card reader SC01 to the terminal. Failure to do so may
cause malfunction.
Attaching SD card reader SC01 to the terminal
b
a
30-pin plug
External connection jack
SD card slot
SD card/microSD card
SD card reader SC01
Information
•
Make sure to follow the connection procedure when attaching an external
device. Failure to do so may cause malfunction.
•
Do not turn the terminal off or remove an external device during data
transmission. Also make sure to follow the procedure when removing an
external device. Data may be damaged.
•
Specifications and appearance are subject to change without prior
notice.