18
G
e
tt
ing st
ar
te
d
1
Open the UIM card slot cover, push it lightly in the arrow
mark direction until it clicks.
The UIM is popped out a little.
2
Pull the UIM straight.
The UIM has a security code, namely PIN code (P.54).
■
Internal battery life
•
The internal battery is a consumable accessory. Each time it is
charged, time available with each charging reduces.
•
When a time available with each charging is reduced to about a half
from that of a new battery, replacement of the battery is recommended
because it is near the end of life. For replacement of the internal battery,
contact "Repairs" on the last page of this manual (in Japanese only) or
a DOCOMO-specified repair office.
■
Battery charge
•
Attached AC adapter is applicable to 100-240V AC.
•
AC adapter has a plug dedicated to 100V AC (for domestic use). When
using overseas, a conversion plug adapter applicable to the country
you are staying is required. Do not charge the battery using a
transformer for overseas travel.
•
When you use the terminal while charging, the touch screen may not
work if the power supply for charging is unstable. In this case, remove
the AC adapter to stop the charging.
•
When inserting/removing the connector, make sure not to put
excessive force.
■
Do not charge the battery pack for a long time (for some days)
with the terminal powered on.
•
If you remain the terminal power on for a long time while charging, the
power supply starts from the internal battery after completion of
charging. The usage time duration may be short and the battery alarm
sounds soon. In that case, please charge it again correctly. For
recharging, remove the terminal from the AC adapter and reconnect it
again.
Removing the UIM
Information
•
For handling the UIM, take care not to touch or scratch the IC.
•
Attaching or removing forcibly may damage the UIM.
•
Be careful not to lose the removed UIM.
Security codes of the UIM
Charging