17
G
e
tt
ing st
ar
te
d
a
p
Power/End button
•
Press this button for 2 seconds or longer to turn on the power of the
terminal.
•
You can set the screen lock manually (P.21).
•
Press this button for 1 second or longer to display Tablet options. You can
turn the power off or set Manner mode or Flight mode.
•
To reset the terminal, press and hold for approximately 10 to 15 seconds
until the terminal restarts.
b
h
Volume down button/
g
Volume up button
•
Adjust the media volume.
•
Tap
to adjust media volume, notification sound, alarm volume.
c
Headphone connection jack
•
3.5 mm diameter connection jack for connecting Stereo Headset with
microphone (sample), etc.
d
UIM card slot
e
Light sensor
•
Sense ambient brightness. Used for auto-adjustment of brightness of the
display, etc.
f
Front camera
•
Used for shooting yourself etc.
g
Display (touch screen)
➝
P.21
h
External connection jack
•
Use to connect included option USB cable etc.
i
Microphone
•
Use when shooting moving pictures.
j
GPS antenna*
k
Xi antenna*
l
Rear camera
•
Shoot still images or moving pictures (P.81).
m
Flash
•
Turn on for shooting still image/moving picture.
n
Bluetooth/Wi-Fi antenna*
o
Speaker
* The antenna is built in the terminal. Covering around the antenna by the hand
may affect the quality.
UIM is an IC card storing user information. If UIM is not installed to the
terminal, some functions are not available.
•
For details on handling UIM, refer to the UIM manual.
•
Only UIM is available for the terminal. If you have a docomo mini UIM card
or FOMA card, bring it to a docomo Shop to replace.
•
Before attaching/removing the UIM, turn off the terminal (P.21).
•
Watch out for jumping out the UIM when attaching/removing.
1
Open the UIM card slot cover, insert the UIM in the
direction shown on the illustration (IC side down) into the
UIM card slot until it clicks.
UIM
Attaching/Removing UIM
Attaching UIM
IC
UIM card slot
cover
UIM card slot
Corner cut