NTT docomo GALAXY Tab SC-01D, Instruction Manual, Page: 109 / 126

107
Appendix/Index
■
Display
■
Mail
■
Camera
■
Overseas Use
Cannot connect to the
network.
• Do you use in radio wave weak area?
➝
P.28
The terminal does not
respond and cannot
operate. • Press and hold
p
for 10 to 15 seconds.
The terminal restarts automatically. Even if
the terminal is restarted, the trouble is not
resolved, try "Factory data reset" (P.56).
Trouble Check and remedy
The display is dim. • Do you set elapsed time to turn off the
screen display?
➝
P.52
• Do you change brightness setting of the
display?
➝
P.52
• Check if you activate Power saving mode
.
→ P.52
• Check if you activate Auto adjust screen
power
. →
P.52
• Is the battery level low?
➝
P.19
Trouble Check and remedy
Email is not received
automatically. • Is Email check frequency in the email
settings set to "Never" ?
➝
P.66
Trouble Check and remedy
Trouble Check and remedy
Still images and moving
pictures shot with the
camera are blurred. • When shooting a close object, switch to
macro shooting.
• Check if clouds or dirt attach to the lens of
camera.
An error message appears
when activating Camera.
• Check the battery level.
➝
P.20
• Check the memory space.
• Restart the terminal.
Trouble Check and remedy
Cannot use the terminal
overseas.
■
When antenna mark is displayed
• Do you subscribe WIRLD WING? Confirm
your application status of WORLD WING.
■
When (Out of service area) appears
• Check if you are out of the international
roaming service area or in an area with poor
signal strength.
• Check if the service area and network
operator are available, referring to "Mobile
Phone User's Guide [International
Services]" or DOCOMO International
Services website. Try to change the network
settings or overseas network operator
settings. Set "Network operators" to "Select
automatically".
→
P.104
• Turning the terminal power to "OFF" and
then turning "ON" again may work for the
restoration.
Continued to next page