NTI SPLITMUX-DVI-4RT, Installation And Operation Manual, Page: 80 / 109

SPLITMUX - Installation and Operation Manual
HOTMOUSE
75
Hotmouse Cursor IN PIP MODE
Change active channel
Enable Hotmouse Cursor. Move the Hotmouse Cursor to the PiP-image of the channel you wish to activate
and press the left mouse button.
Vertical positioning of PiP images
Activate Hotmouse Cursor. Move the Hotmouse Cursor to the PiP-image area, hold down the left mouse
button and drag the PiPs to the desired vertical position.
HOTMOUSE CURSOR IN PIP MODE
Note:
When the Hotmouse Cursor moves over a PiP-image, its appearance changes
(arrows, channel number).
Note:
As soon as the Hotmouse Cursor moves over a PiP image, its appearance changes
(arrows pointing in vertically).
Example: Switch from channel 2 to channel 3
Channel 2 is active Channel 3 is selected. Channel 3 is active.
2
1
4
3
2
1
4
3
3
1
4
2
Example: Move PiP images upward
2
1
4
3
2
1
4
3
2
1
4
2