ANNEX
SPLITMUX- Installation and Operation Manual
6. Configure the displays on each channel to appear as desired while “Win1” is selected, changing the Position, Size, and Aspect
ratio as needed. The unit will auto save as you change each parameter. Be sure to adjust these settings for each channel while
Win1 is still selected.
Tip: You can also use the Hotmouse Menu to configure the presets (manual page 82).
7. Repeat for presets Win2, Win3 and Win4 as desired.
Now, anytime you select that channel and place that channel in Win mode (<Ctrl> + <W>), it will start with your preset
configuration of display appearance.
Tip: While in Win mode, Enter <Ctrl> + <W> + <2> to switch from preset Win1 to preset Win 2.
“If multiple SPLITMUX-DVI-4RT Units are Cascaded, can you make any one of the inputs full
screen?”
1, Configure the Master hot key setting to activate with a hotkey different than the default (i.e. change to <Ctrl> + <Win>). (manual
page 19)
2. Keep the default hot key as <Ctrl> + <Alt> for each Slave unit.
3. Enter <Ctrl> + <Win> - <1> (if the slave with the display you want at full screen is connected to Channel 1 of the master) This
will connect directly to Channel 1 of the Master.
4. Enter <Ctrl> + <Alt> - <1> (if the display you want at full screen is connected to Channel 1 of the slave) This will connect
directly to Channel 1 of the Slave connected to Channel 1 of the Master.
5. Enter <Ctrl> + <Alt> - <F>. This will put the video source on Channel 1 of the Slave at full screen for the Slave.
6. Enter <Ctrl> + <Win> - <F>. This will put the video source on Channel 1 of the Slave at full screen for the Master.
102
Summary of Contents for SPLITMUX-DVI-4RT
Page 52: ......
Page 89: ...SPLITMUX Installation and Operation Manual ANNEX 84 DECLARATION OF CONFORMITY...
Page 109: ......
