SPLITMUX
- Installation and Operation Manual
INTRODUCTION
5
FRONT PANEL
The
SPLITMUX
front panel has eight status indicators (LEDs) and eight buttons.
Buttons 1 to 4 switch between channels, LEDs 1 to 4 indicate the status of the individual channels.
Full, Quad
,
PiP
and
Win
buttons LEDs are used to switch and indicate display modes and other functions, e.g. opening the
OSD menu.
LED indicators
- LEDs
1
to
4
:
When these LEDs light up
green
, the corresponding channel (computer port) has
been selected and is available for keyboard and mouse access. When a LED flashes
green, there is no signal at the video input of the selected channel.
An LED lights up
yellow
when there is a signal at the video input, but another channel
has been selected.
When the LED is
dark
, there is no signal at the video input and another channel has
been selected.
The LEDs light up
blue
when Win Mode preset window configuration is being selected.
- LED
Full:
This LED lights up
green
when the unit is in Fullscreen mode.
- LED
Quad
:
This LED lights up
green
when the unit is in Quad mode.
- LED
PiP
:
This
LED lights up
green
when the unit is in PiP mode.
- LED
Win
:
This
LED lights up
green
when the unit is in Win mode.
Note:
While the OSD menu is open, the active computer can still be operated by mouse or touch screen.
HARDWARE
Status LEDs
Front panel
Buttons
Summary of Contents for SPLITMUX-DVI-4RT
Page 52: ......
Page 89: ...SPLITMUX Installation and Operation Manual ANNEX 84 DECLARATION OF CONFORMITY...
Page 109: ......
