SPLITMUX
- Installation and Operation Manual
INSTALLATION
12
CONNECTING VIDEO SOURCES / COMPUTERS
Switch off the computer and disconnect the keyboard, monitor and mouse.
Connect keyboard and mouse ports of
SPLITMUX
to the computer ports either with a single USB cable
or via the PS/2 interface (use the Y cable) up to 5 meters. For greater distances use a KVM or USB extender.
To connect an analog video / computer source (VGA) to
SPLITMUX
, use a VGA-DVI cable. Digital video
sources are connected via a DVI cable up to 20 meters. For greater distances use a DVI or VGA extender.
CONNECTING USB DEVICES
Connect a USB device to one of the four transparent USB ports to switch it to computers connected to
SPLITMUX.
SPLITMUX
supports transparent USB devices such as printer, external memory, 3D mouse, and finger
printer.
POWERING UP THE SYSTEM
Switch on
SPLITMUX
with the power switch on the rear panel. All front panel LEDs light up briefly
indicating that
SPLITMUX
is ready for operation.
SPLITMUX
is now in Quad mode (default).
Power up all connected computers.
SPLITMUX
recognizes all input video sources automatically and
displays them on your monitor screen.
To select another display mode, use the relevant keyboard commands (see page
86
) or buttons on the front
panel (page 6).
INSTALLATION
Connect
USB devices
keyboard
Mouse
keyboard
& mouse
Digital or
analog
PS/2 - Y cable
OR
USB cable (A-B)
DVI-I -HD15 or DVI cable
Summary of Contents for SPLITMUX-DVI-4RT
Page 52: ......
Page 89: ...SPLITMUX Installation and Operation Manual ANNEX 84 DECLARATION OF CONFORMITY...
Page 109: ......
