SPLITMUX
- Installation and Operation Manual
INTRODUCTION
10
REAR PANEL (continued)
6. RS 232 / RJ45 control port
Connect external serial control devices to this RJ-45 port to operate
SPLITMUX
remotely, e.g. connect to
this port to access the OSD menu from a computer using the ConfDev device configuration tool (see page
89
).
The serial RS 232 port is also used for firmware updates (see page
93
).
7. USB for keyboard, mouse, touch or trackball (console)
Two USB ports allow connecting keyboard, mouse, touch screen or trackball.
Using a USB-Hub, you can connect
multiple
keyboards and mice.
They will work in share mode with an inactivity timeout of 3 seconds.
8. USB or PS2 keyboard and mouse (computer)
Each computer can be connected with PS/2 or USB-B for keyboard and mouse.
. Four transparent high-speed USB 2.0 ports
USB devices (printer, memory stick, finger printer, 3D mouse) are connected to the four transparent USB ports.
This transparent USB 2.0 matrix switches USB 2.0 periphals to computers connected to
SPLITMUX
.
HARDWARE
Summary of Contents for SPLITMUX-DVI-4RT
Page 52: ......
Page 89: ...SPLITMUX Installation and Operation Manual ANNEX 84 DECLARATION OF CONFORMITY...
Page 109: ......
