© 2022 Genesis Attachments, LLC
Genesis GXT Mobile Shear 41
AutoGuide Adjustment Procedure
AUTOGUIDE
The AutoGuide (or puck) makes light contact with the wear surface of the upper jaw to maintain
proper jaw alignment. Check the puck daily for wear or damage, replacing when grease grooves
are no longer visible.
Tolerances between the puck and the wear surface should be 0.005” to 0.010”.
3
Check tolerances every eight hours of operation and shim as needed.
3
Never overtighten the puck against the wear surface.
3
Perform puck maintenance and shimming before performing blade maintenance.
Use the following procedure to maintain the proper gap and shim the puck.
1. Slowly close the upper jaw until the puck is centered on the wear area.
2. Check the gap, using a feeler gauge or shims.
3. Loosen the bolts on the outside of the stick.
4. Completely remove the upper bolt.
5. Insert shims, insert top bolt, tighten both bolts.
6. Check gap with feeler gauge.
1
2
3
4
6
5
