© 2022 Genesis Attachments, LLC
Genesis GXT Mobile Shear
18
ROTATION LOCK
Rotation (transport) locks are installed at the factory to allow the bracket to be shipped with the
mounting pins facing upward. This is beneficial to the end user when removing the attachment
from the truck and mounting it to the excavator.
Rotation locks MUST be removed before operating the attachment to prevent rotation
system damage.
The rotation locks are located inside the small bolt covers for the slewing ring and marked with
a red flag labeled “REMOVE ROTATION LOCK BEFORE OPERATION”. The cover bolt can be
threaded into the rotation lock for removal.
There are TWO locks in every attachment, one on either side of the bracket. In some cases, one
of the port blocks may need to be removed to access the rotation lock. The rotation locks and red
flags should be saved for use during future transportation.
