NPI SEC-05LX, Operating Instructions Manual

Page: 34 / 69

30
POWER POWER / FUSE / LINE VOLTAGE
SELECTOR / FUSE /
LINE VOLTAGE SELECTOR
The power chord is connected by a
standardized coupling which comprises
also the fuse, voltage selector and a line
filter. With 230V AC the fuse must be
0.63A (slow), with 115V AC it must be
1.25A (slow).
CAUTION: (see also page 2)
•
Always use a three-wire line cord and
a mains power-plug with a protection
contact connected to ground.
•
Before opening the cabinet
disconnect mains power-plug.
•
Disconnect mains power-plug when
replacing the fuse or changing line
voltage.
•
Replace fuse only by appropriate
specified type.
SYNC. MODE CONNECTORS / SWITCH see Appendix “Synchronization of Two
or More SEC Amplifier Systems”