NPI SEC-05LX, Operating Instructions Manual

Page: 47 / 69

Passive Cell Model User Manual
_________________________________________________________________________________________________________________
___________________________________________________________________________
version 4.0
page 3
Figure 2: Schematic diagram of the passive cell model
1.2. Connections and Operation
Connections

Turn POWER switch of the amplifier off.
a) For simulation of an experiment using a suction electrode

Connect the BNC jack of the cell model to the BNC connector P
EL
of the headstage.
b) For simulation of an experiment using a sharp electrode

Connect the SMB connector of the cell model to the BNC connector P
EL
at the headstage.
For headstages with BNC connector use the supplied SMB to BNC adapter.
For a) and b)

Connect GND of the cell model to GND of the headstage.

Do not connect DRIVEN SHIELD