User Manual
XTO 2.ie
Edition A3 - 05/2021
41
Operation
Anomaly Output
Print Start Delay
It delays the start of the printing cycle of the programmed time.
Print_Start_Delay_Max = 1000 ms
Print_Start_Delay_Min = 0 ms
Default = 0 ms
Print when label is received -
the print cycle will start automatically at the end of label file reception.
Disable Print Command when C2S=1 -
if the check is enabled C2S input disables the print command
execution. If C2S arrives during the print cycle phase, the cycle in progress is terminated and an FAP
pulse is generated.
Enable Page I/O
0 = disabled
1 = from disk C:, A:, B:
2 = from disk K:
To enable this flag means that the labels 0.LM1, … ,15.LM1
previously stored in the printer memory, can be selected via 4 digital inputs; these 4 opto-isolated
inputs are available on the ENCODER port of the printer.
Set IP parameters:
If the Wait Ready function is enabled, W character is emitted when the print cycle starts and R
character is emitted when the print cycle is finished (before the carriage comes back to home) or
immediately when an error occurs during print.
Note:
the parameters for connecting to the PC via the Ethernet port are explained in detail in
the Chapter "Installing the printer -> Connections" of the Technical Manual.
Figure 59: communication parameters
Summary of Contents for EIDOS XTO 2.ie
Page 2: ......
